S2N2E N2 to Ethernet Gateway
This is a legacy product and is only offered to existing S2N2E customers that require spares and/or support. However, should customers require something similar we can offer a newer product that provides Bacnet IP or MS/TP to N2 functionality along with numerous Web services (MQTT, etc).
Overview
The S2N2E Gateway is a Communication Bridge between a local Johnson Controls’ Metasys N2 Communication Bus (N2 Bus) and multiple remotely connected N2 Buses and N2 Compatible field devices. These multiple N2 Buses/Devices can be located across the city, country, or even the World providing that they have access to a TCP/IP Ethernet connection (i.e. Corporate Intranet, Internet, etc).
S2N2E Topology
Connection
The S2N2E bridges the Ethernet connection transparently to both the NCM/NAE and the remote N2 devices. Two S2N2E devices are required (minimum configuration) where one device (local) acts as a N2 slave/Ethernet Master and the other (remote) an Ethernet Slave/N2 Master. The total link is transparent to the Metasys Operating Software, the local NCM/NAE, and the remotely connected N2 devices. Thus, remote N2 devices can be monitored and controlled by Metasys/NCM as if they were locally connected.
Specifications
|
Part Number:
|
Power Requirements:
|
|
Environment:
|
Dimensions:
|
|
N2 Protocol Support:
-30
-100 AIs, 100 AOs, -100 BIs,100 BOs, |
Supported N2 Devices:
|
|
Documents: |
Mounting Options:
|