S2SWDP8 - 8 Channel Switch Input Module with Momentary Switch Input Support
Overview
The S2SWDP8 is an eight (8) channel momentary switch module that can be used to control Industry standard 2-wire lighting relays (Panasonic, Aromat, Douglas, NexLight, etc) either directly or in conjunction with the S2BACLightDP and other lighting controllers such as the older Douglas lighting devices (e.g WRS-2224)
The S2SWDP8 momentary switch inputs can be used with any manufacturer's momentary switches, but also can be used with numerous third party motion or occupancy sensors or with the site's building HVAC systems (both require dry contact outputs).
Specifications
|
Part Numbers:
- S2SWDP8-MB (Magnetic Base)
- S2SWDP8-DIN (Needs DIN Adapter Plate)
|
Compatibility:
- Direct connection and support for Douglas Controller (e.g. WRS-2224) Group Inputs
- Direct Control of Douglas, Panasonic, Aromat, and other 24VAC 2-wire latching relays
|
|
Power Requirements:
- 24 V AC/DC 60 Hz @ 500 mA
- Current requirement varies with use
Environment:
- Temperature 0 C to +60 C
- Humidity: 10 - 95 % RH (non-condensing)
Dimensions:
- 4.3”L x 3.1”W x 1.2” H
- 10.9cm L x 7.9cm W x 3.1cm H
|
Outputs:
- Eight (8) 24V Pulsed Outputs supporting up to eight (24) Panasonic/Aromat/Douglas WR-6221, WR-6161 or compatible 2-wire latching relays
- Maximum 4 relays per Output
- Eight (8) Dual LED (Red/Green) Status Indicators showing real time state of relays or Group Inputs
Inputs:
- Eight (8) On-board Local Switches (Toggle on or Off)
- Eight (8) Momentary "On" Switch Inputs (2-wire or Dry Contact)
- Eight (8) Momentary "Off" Switch Inputs (2-wire or Dry Contact)
|
|
Mounting Options:
- Magnetic Base
- DIN (Needs DIN Adapter Plate)
|
Documents:
|
